SOFTWARE
BELT DESIGN SOFTWARE
BeltStat
BeltStat is a powerful software tool used in the design of standard or pipe conveyor belts. Developed with flexibility of use in mind, when used correctly using good engineering judgment coupled with conveyor design expertise, the software can quickly deliver the following results:
- Belt width and speed
- Pulley and shaft design
- Belt Tension Rating and Cover Selection
- Radii of vertical curve and special free spacing
- Counterweight tension
- Brake size (if necessary)
- Nominal power of motors
- Idler banking angle (if applicable)
- Idler spacing and specifications
- and much more…
![belstast desktop](https://www.cvdyn.com/photos/2019/12/beltstat-v8.png)
PULLEY DESIGN SOFTWARE
PSTRESS CLOUD
PSTRESS is a powerful pulley design tool that allows you to quickly calculate the stresses in a pulley. Unlike a FEA program, by using PSTRESS on the same pulleys, the same response will always be obtained when the same geometry is used under the same loads. The mesh and limit conditions are predetermined and most of the solution is analytical, so the calculation times are usually less than one second. This allows designers to quickly review the effect of a design change on the shear stress distribution and quickly arrive at an application optimized design.
![pstress](https://www.cvdyn.com/photos/2019/12/pstress-e1576593090706.png)